MERCURY OUTBOARD SPORTJET 175 XR2 / 2000 - 2005 PART No. 858257T25

Description

" OUTBOARD REBUILDER"
THE WORLD LEADER SINCE 1972
**COMPLETELY REMANUFACTURED OUTBOARD POWERHEADS
Bid Today and SAVE $$$
1 YEAR WARRANTY ON ALL OF OUR POWERHEADS
WITH OUR BUYING POWER AND STATE OF THE ART MACHINES WE CAN SAVE YOU MONEY
$$$$
WITHOUT SACRIFICING QUALITY !!  OVER 20,000
powerheads done and 200 marine dealers to our credit we can offer you same as new powerhead for a fraction of the price.
YOU ARE BIDDING ON A 100% REMANUFACTURED LONG BLOCK MERCURY V6 SPORT JET 175 PART PART NO. 858257T25 OR 858257R11
reusable core is required at ebay price
OVER 30 YEARS AT SAME LOCATION, If TROUBLE SHOWS UP WE WILL BE HERE TO HELP!!!
Installation Available
P
A/NFL
At Outboard Rebuild when we use the word ReMANUFACTURED you can be 100% sure that all cylinders have been machined by only the best machines that are available. Rotler F3 boring center that is designed to do blind hole engines,  Rottler H8500 Diamond computer assisted hone for unsurpassed cylinder wall finish, critical in 2 stroke motors that rely on oil/gas mix that is needed to lubricate, We machine all critical surfaces back to uniform for proper gasket sealing. We install NEW parts, Pistons, Piston rings, wrist pin's, Oil gear, thermostats,rod bearings, crank seals, the list goes on and on.. We feel you should get what you pay for " A powerhead that last YEARS as they should
The Industry (outboard remanufacturing) standard for rebuilt motors is ONLY 100 hours per outboard repair, and a loss of up to 20% power loss . Here is the problem:  piston and ring seating is dependent directly on cylinder wall finish. To accomplish the proper finish, the method used is referred to as "plateau finish". This process is how today's automobile motors go well over 100,000 instead of maybe 50,000 miles like they used to. To obtain this finish in a blind hole motor (outboards) you can't use automotive machining methods. Special machines using diamond precision computer controlled hones are needed. These machines with their support equipment are a must on modern outboards, gone are the days that you can do this correctly at a dealer or in a garage. With this in mind we attempt to educate.
For the uneducated customer who looks only for low price also gets a new friend.  Who? The dealer or person who is going to rebuild your engine again, to the industry standard, AGAIN...
DID YOU KNOW WE ARE THE ONLY REBUILDER THAT REBUILDS OUTBOARD CRANKSHAFTS IN HOUSE ?
All our Rebuilds have the crankshafts replaced or refinished. We don't put new bearings on a used crankshaft without at least checking
integrity
to .002 of an inch
then polishing. We are the only rebuilder who can refinish crankshafts if needed with the
proper equipment
, "submerged arc welding" for hardened nitrated outboard crankshafts.
We will arrange all shipping. We ship daily and will pass our 85% discount on to you !! Residential service available with lift
gate.
Seasonal Delays Possible
I wanted to show just a few of our testimonials that we have received in the past 35 years of rebuilding and selling NEW and remanufactured motors / powerheads:
Hey Mike Jesse. I bought a 2002 Merc 225 from u on eBay on July 4th. I’m trying to update my feedback to let you know motor is running perfect. And looking just as good. Wanted to thank you. Can’t tell you how many people ask me how if I got new motor for 1996 Bass boat. Thanks again! Jesse
M
Hey Mike, hope everything is going well for you. Just wanted to thank you for the smooth transaction of my Pro XS purchase. It was a long trip up there but it was worth it! Also it was a good decision to just drive up there and swap motors instead on shipping them back and forth. I took your advice and broke in the motor nice and easy. The motor runs like a champ now. This motor has plenty of power and gets way better gas mileage than my old one. I will be sure to recommend your services to all my fishing buddies!
On a side note, I have fished 2 tournaments out of the boat and cashed a check both time, one 2
nd
place and one 9
th
. I included a link to one of them. Show this to you dad, he will get a kick out of. Thanks again Mike.
You guys are the best! I love the OptiMax 225 I bought from you! There was an issue with it but you took care it. What people do when there are problems, that is the real test.
Nick Patterson
It has been a pleasure doing business with you and BBI !!!
I could not use the additional parts that was sent with the motor and Dawn quickly credited my account.
It took four weeks to complete the fabrication of the off-shore bracket and installation of the Optimax 225. The motor break-in was started on Nov. 23, 2013 under the supervision of my mechanic. His assessment of the motor was stellar.
Thanks again
Happy Sailor Floyd
Hey Mike and Crew,
I just wanted to throw a little feedback your way after getting home with my "New" motor.  YOU SAY THAT "YOU STRIVE TO SEND OUT THE BEST PRODUCT AT A GREATLY REDUCED COST"  YOU HAVE DEFINITELY ACHIEVED THAT GOAL!!!  I would just like to say that I was very impressed with your first class operation.  You guys really have your game nailed down.  Everyone there had a part to play and played it perfectly like a well oiled outboard!  Anything positive that can be said about the business you are in applies to Ooutboard Rebuilder!  375 miles each way to your shop, 5.00 round trip in gas and killing my body with all the fast food along route 80 west was totally worth it!  As long as you guys are up and running I really don't understand why anyone would buy a showroom motor when they can purchase one of yours and especially when you can't tell the difference between yours and a showroom motor.  Awesome Prices, Awesome customer service and Awesome Quality!!!
Thanks so much,
Louie G  W.  Milford, NJ
I bought a 1999 90 hp Rebuilt Johnson from you;s, 1-1/2 years later this motor runs like a brand new one. Power-more than a new motor, starts every time and I fish in very cold weather and heat, never shuts off once its running.
Right after I bought this motor it developed a miss, one call to these folks and I returned to be treated very nicely and the motor was fixed by replacing a part, NO CHARGE!
I will never buy a new motor as long as these nice dependable folks are rebuilding outboards, I would recommend Outboard Rebuild to anyone who needs a rebuilt, you will be treated well and end up with a better than new motor, My life depends on this motor to get be back to the dock and it has.
Thanks for a product keeps working and if I ever need motor help, you's have my business. (James R - PA)
Just a quick note to say thanks again for the excellent service. I installed the YAMAHA 90 on my boat and it has been used four times since. It runs better than ever. It is quieter and it has more power. A special thanks to Brian and Stan for the work they did. I won't hesitate to recommend you guys.
(Doug T - GA)
I just wanted to thank Mike Sr. and everyone for the help you guys gave me with the trim tilt on my 2000 Johnson 50 hp out board. You guys completely rock. I got everything back on the boat yesterday, bled and filled the trim tilt unit and took the boat out. Everything is working perfectly. Thank you all again. I am recommending you to everyone I talk to who is looking to buy an outboard.
(Steve - FL)
Awesome rebuild! (Yamaha 225 VMAX) Better than when Brad bought the boat. We went out Tuesday and broke the motor in. It runs smooth as silk, better than when it was new. (Bill - Greenville, SC)
I
bought a 1998 Mercury 150 EFI from your company in June of 2007, This engine has run like a top from day 1. I have sent three of my Blass Club friends up to have rebuilds done and all three used your "while you wait" service (in by 9 out by 4) and so far Outboard Rebuild is batting 1000.
I just wanted to say thanks again. (RF - New Rochelle, NY)
Last year you guys rebuilt the powerhead on my 1993 Johnson 115. I take the boat out weekly and have not had a problem at all with the rebuild even after putting over 100 hours on the motor.
Mike, Jr and the ladies in the office were very helpful during the whole process. Thanks! (SG - Dry Prong, LA )
I may have had some anxiety in purchasing my Remanufactured OptiMax 225 sight unseen 6 months ago, but it has met all the claims Outboard Rebuilder makes and it's exceeded my expectations after 50+ hours of off shore operation. It runs like new (strong and dependable)! Your recomendation of using Terry in Deland as an installer worked out great as well. He knowledge is vast and work is quality. I appreciate Mike keeping his word in all transactions like sticking to the trade-in-price on my old motor. I will surely recommend your product to all friends and associates.
Thank You. (JT - Clearwater, FL)
Thanks Ooutboard Rebuilder for the rebuild on my 2002 175 Johnson outboard this thing is faster then ever. We got to there shop at 9am for a complete rebuild ( wile you wait ) Dan had our powerhead off in 30min , 5 hrs later i was heading home to Maryland with a complete rebuild. It has been 7 months and this motor is smooth and FAST we took mike's advice and had them do the mild mod's and man am i glad this picked up 400 rmp. from 5500  to now 5900, this thing will run with  225's all day long!! Ray from  Baltimore, MD
THE BEST, what else needs to be said, AAA+++, Unbeatable service and price!!!
2007 300ProXs Mercury High Performance 20 Bad Boy (#160405270097)
US ,000.00
More Positive Feedback:
The Johnson 90 hp runs as smooth as a brand new motor. You guys really know how to rebuild a strong outboard, it pushes our 24ft. pontoon three times faster than the old 60 horse Merc. that originally came with the boat. We are very satisfied with your product and service. (TB- Henderson, NV)
Testimony from a valued customer:
Sent my sick 1997 Force/Merc 120 to One Outboard for a Power Head Overhaul. Two weeks later without hesitation my Power Head was returned in the same pallet I sent (which I requested) the head cleaned, overhauled and ready to go. I installed this the same day and had a Marine Mechanic assist in the rigging. Started up first attempt and it sound awesome. Had it on
the water for a ten hour break- in within two weeks. Now have about 40 hrs on it and running like a champ. I would recommend Outboard rebuild to everyone who has a problem with their engine or power head. Thanks to Mike and his knowledgeable crew and customer service I’m enjoying South Texas clear water and outstanding fishing. (RB- DelRio, TX)
Hard to believe that you would go anywhere else .In the past we have sent motors to Texas, Fl ,Georga even the factory rebuilds was really getting discuraged with the whole rebuild thing . Four years ago we started to use Blackbird for our motors ,What a difference. They go out of their way to help us ,their service is great our rental business dosent have near the down time....Rob,  Erie boat rental, Erie Pa
My experience dealing with Mike and his company was a good experience. I bought a pair of 2003 225 optimax motors and was very pleased with the price, service and installation. They did a very good job re-rigging and setting up the new smart gauges and controls. I towed over 320 miles one way and it was definitely worth it. Thanks to Mike and his guys.
---D Scrivener
I am 100% happy with the 2007 Mercury ProXS 250 powerhead rebuild mike and his guys did for me, It has only been 11 months but if power is any sign to how long this rebuild will last im good to go.. I have picked up 300rpm and close to 3 mph from before the motor broke.
On a side note:
I called mike on a Monday and he got me in his shop by Wednesday the same week and had me back up and running for no extra cost !! So i thought the least I could do was post this thank you to him and his guys..
Tony A , Marietta, Ga